Set Image Composition - HIKVISION iDS-TCH44P-B User Manual

Network Traffic Camera (Multi-lens LPR Camera) User Manual

3.2.3 Set Image Composition

You can enable the image composition to composite several pictures into one to make it
convenient to view the violation captured pictures.
Steps
Note
The function is available only for Channel 1.
1. Go to Configuration → Device Configuration → Capture Parameters → Image Composition .
2. Check Enable Composition.
3. Set composition types for different picture quantities.
4. Set other composition parameters.
Close-up Zooming Ratio
The higher the value is, the larger the close-up is.
Close-up Picture No.
It is the picture where the close-up comes from.
Plate Close-up Offset
The device can capture close-up pictures according to the set offset when no license plate is
recognized.
5. Optional: Check Close-up Separate Output to output close-up pictures independently when the
picture composition is not enabled.
Note
Enabling composition and outputting close-up independently conflict with each other. You can
only enable one.
Figure 3-4 Set Image Composition
9