Set Image Encoding Parameters - HIKVISION iDS-TCV500-B(I)/IM User Manual

3.2.7 Set Image Encoding Parameters

If the captured pictures are not clear, set the resolution of the captured pictures and the picture
size.
Steps
1. Go to Configuration → Capture → Capture Parameters → Image Encoding and Composition →
Image Encoding.
2. Select Capture Resolution and Close-up Picture Resolution.
3. Enter the picture size.
JPEG Picture Size
The size of the compressed captured picture. The actual size is related to the scene
complexity.
Composite Picture Size
The size of the compressed composite picture. The actual size is related to the scene
complexity.
Note
Only the device supporting picture composition supports composite picture size settings. The
actual device prevails.
Picture EXIF Format Transmission
The captured pictures will be transmitted in the EXIF format.
4. Click Save.
Tyre and Axle Recognition Unit User Manual
Figure 3-7 Set Image Encoding Parameters
12