Set Modbus; Operate Via Mobile Client - HIKVISION DS-2TD2637T-7/P User Manual

Thermal Optical Bi-spectrum Network Camera User Manual
2. Select Server Certificate.
3. Select Encrypted Algorithm.
4. Click Save.
Note
Only certain device models support this function.

3.14 Set Modbus

Modbus TCP is a communication protocol that allows the Modbus client to acquire thermometry
data from the device, or configure the temperature measurement function via TCP/IP Ethernet
network.
Steps
Note
You can set the Modbus TCP port, go to Configuration → Network → Basic Settings → Port .
1. Go to Configuration → Network → Advanced Settings → Modbus .
2. Select Modbus TCP mode.
Device Mode
The device is set as Subordinate by default, which means that the device operates as a
Modbus server processing the request from the client.
Register Mode
In Read Only, the client can only read all the register data. In Read/Write, the client can
configure the device using the Modbus TCP protocol.
3. Check Enable Authorized IP Addresses and click Add to add IP addresses that are allowed to
access to the device.
Note
With regard to the network security risk, it is recommended to limit permission only to trusted
IP addresses.

3.15 Operate via Mobile Client

Hik-Connect is an application for mobile devices. Using the App, you can view live image, receive
alarm notification and so on.
Note
Hik-Connect service should be supported by the camera.
13