HIKVISION DS-2TD2637T-7/P User Manual page 31

Thermal Optical Bi-spectrum Network Camera User Manual
Note
The required verification code is the code you create or change when you enable Hik-Connect
●
service on the camera.
If you forget the verification code, you can check the current verification code on Platform
●
Access configuration page via web browser.
6. Tap Connect to a Network button in the popup interface.
7. Choose Wired Connection or Wireless Connection according to your camera function.
Wireless
Connection
Wired
Connection
Note
The router should be the same one which your mobile phone has connected to.
8. Tap Add in the next interface to finish adding.
For detailed information, refer to the user manual of the Hik-Connect app.
Input the Wi-Fi password that your mobile phone has connected to, and
tap Next to start the Wi-Fi connection process. (Locate the camera within 3
meters from the router when setting up the Wi-Fi.)
Connect the camera to the router with a network cable and tap Connected
in the result interface.
16