HIKVISION DS-2TD2637T-7/P User Manual page 7

Thermal Optical Bi-spectrum Network Camera User Manual
The interface varies with the models. Please refer to the product datasheet for details.
●
If the device needs to be wired by yourself, select the corresponding wire to supply power
●
according to the electric parameters labeled on the device. Strip off wire with a standard wire
stripper at corresponding position. To avoid serious consequences, the length of stripped wire
shall be appropriate, and conductors shall not be exposed.
Make sure that the power has been disconnected before you wire, install, or disassemble the
●
device.
System Security
You acknowledge that the nature of Internet provides for inherent security risks, and our
●
company shall not take any responsibilities for abnormal operation, privacy leakage or other
damages resulting from cyber attack, hacker attack, however, our company will provide timely
technical support if required.
Please enforce the protection for the personal information and the data security as the device
●
may be confronted with the network security problems when it is connected to the Internet.
Please contact us when the device might exist network security risks.
Please understand that you have the responsibility to configure all the passwords and other
●
security settings about the device, and keep your user name and password.
Maintenance
If the product does not work properly, please contact your dealer or the nearest service center.
●
We shall not assume any responsibility for problems caused by unauthorized repair or
maintenance.
A few device components (e.g., electrolytic capacitor) require regular replacement. The average
●
lifespan varies, so periodic checking is recommended. Contact your dealer for details.
Wipe the device gently with a clean cloth and a small quantity of ethanol, if necessary.
●
If the equipment is used in a manner not specified by the manufacturer, the protection provided
●
by the device may be impaired.
To reduce the risk of fire, replace only with the same type and rating of fuse.
●
The serial port of the equipment is used for debugging only.
●
Using Environment
Make sure the running environment meets the requirement of the device. The operating
●
temperature shall be -40°C to 65°C (-40°F to 149°F), and the operating humidity shall be 95% or
less, no condensing.
DO NOT expose the device to high electromagnetic radiation or dusty environments.
●
DO NOT aim the lens at the sun or any other bright light.
●
The equipment shall not be exposed to dripping or splashing and that no objects filled with
●
liquids, such as vases, shall be placed on the equipment.
No naked flame sources, such as lighted candles, should be placed on the equipment.
●
For the device with ventilation openings, the ventilation openings should not be impeded by
●
covering the ventilation openings with items, such as newspapers, table-cloths, and curtains.
vi