HIKVISION DS-2TD2637T-7/P User Manual page 70

Thermal Optical Bi-spectrum Network Camera User Manual
Detection Mode
Double Confirm
Specified Fire Source
Specified Smoke
Note
Fire or Smoke, Fire and Smoke and Double Confirm are mutually exclusive with temperature
measurement function.
4. Set Fire Source Detection and Smoke Detection.
Detection Function
Fire Source Detection
Mode Description
Source Detection and Smoke
Detection or either of them.
The system alarms when
device is triggered both by Fire
Source Detection and Smoke
Detection.
The system alarms when
device is triggered only by Fire
Source Detection.
The system alarms when
device is triggered only by
Smoke Detection.
Alarm Interval
Set the alarm interval between two alarms.
The smaller the value is, the higher the
detection frequency is.
Picture Quality
Set quality of the alarm capture. The better
the quality is, the sharper the image is, and
the larger the file size is.
Fire Source Detection
Dynamic Fire detects the dynamic fire
source and Smoking Mode detects the
smoking behavior in the scene.
Smoking Mode is not supported in Fire
and Smoke and Double Confirm.
Display Fire Source Frame on Stream
55
Configuration Description
Set Fire Source Detection, see
step 4.
Set Smoke Detection, see step
4.
Parameter Description
Note