Thermal Optical Bi-spectrum Network Camera User Manual
3. Refer to Set Arming Schedule for setting scheduled time. Refer to Linkage Method Settings for
setting linkage methods.
4. Click Save.
Note
The function varies according to different models.
8.6 Detect Scene Change
Scene change detection function detects the change of the scene. Some certain actions can be
taken when the alarm is triggered.
Steps
1. Go to Configuration → Event → Smart Event → Scene Change Detection .
2. Click Enable.
3. Set the Sensitivity. The higher the value is, the more easily the change of scene can be detected.
But the detection accuracy is reduced.
4. Refer to Set Arming Schedule for setting scheduled time. Refer to Linkage Method Settings for
setting linkage method.
5. Click Save.
Note
The function varies according to different models.
70