HIKVISION DS-2TD2667T-15/P User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Security Camera
  5. DS-2TD2667T-15/P
  6. User manual

HIKVISION DS-2TD2667T-15/P User Manual

Thermal & optical bi-spectrum network camera
Hide thumbs Also See for DS-2TD2667T-15/P:
Table of Contents

Advertisement

Quick Links

Download this manual
Thermal & Optical Bi-spectrum Network
Camera
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS-2TD2667T-15/P and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for HIKVISION DS-2TD2667T-15/P

Summary of Contents for HIKVISION DS-2TD2667T-15/P

  • Page 1 Thermal & Optical Bi-spectrum Network Camera User Manual...
  • Page 2 INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
  • Page 3 Thermal & Optical Bi-spectrum Network Camera User Manual PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER PREVAILS.
  • Page 4 Thermal & Optical Bi-spectrum Network Camera User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazardous situation which, if not avoided, will or could Danger result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, Caution could result in equipment damage, data loss, performance...
  • Page 5 Thermal & Optical Bi-spectrum Network Camera User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. Laws and Regulations ● In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region.
  • Page 6 Thermal & Optical Bi-spectrum Network Camera User Manual example, in the case of some lithium battery types). ● DO NOT dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, which may result in an explosion. ●...
  • Page 7 Thermal & Optical Bi-spectrum Network Camera User Manual liquids, such as vases, shall be placed on the equipment. ● No naked flame sources, such as lighted candles, should be placed on the equipment. ● Provide a surge suppressor at the inlet opening of the equipment under special conditions such as the mountain top, iron tower, and forest.

  • Page 8: Table Of Contents

    Thermal & Optical Bi-spectrum Network Camera User Manual Contents Chapter 1 Overview ........................1 1.1 Brief Description ....................... 1 1.2 Function ..........................1 Chapter 2 Device Activation and Accessing ..................2 2.1 Activate the Device via SADP .................... 2 2.2 Activate the Device via Browser ..................2 2.3 Login ..........................
  • Page 9 Thermal & Optical Bi-spectrum Network Camera User Manual Chapter 6 Behavior Analysis ......................20 6.1 Flow Chart of Behavior Analysis ..................20 6.2 Set VCA Parameters ......................21 6.3 Calibration ........................21 6.3.1 Calibrate Automatically ..................21 6.3.2 Calibrate Manually ....................22 6.3.3 Verify the Calibration Result ................
  • Page 10 Thermal & Optical Bi-spectrum Network Camera User Manual 9.1.2 Live View Stream Type ..................38 9.1.3 Enable and Disable Live View ................38 9.1.4 Start Digital Zoom ....................38 9.1.5 View Previous/Next Page ..................39 9.1.6 Full Screen ......................39 9.1.7 Light ........................
  • Page 11 Thermal & Optical Bi-spectrum Network Camera User Manual 10.2.4 Day/Night Switch ....................48 10.2.5 Set Supplement Light ..................48 10.2.6 BLC ........................49 10.2.7 WDR ........................49 10.2.8 White Balance ....................49 10.2.9 DNR ........................49 10.2.10 Defog ........................ 50 10.2.11 Gray Scale ......................
  • Page 12 Thermal & Optical Bi-spectrum Network Camera User Manual 11.2.1 Record Automatically ..................59 11.2.2 Record Manually ....................60 11.2.3 Playback and Download Video ................60 11.3 Capture Configuration ....................61 11.3.1 Capture Automatically ..................61 11.3.2 Capture Manually ....................62 11.3.3 View and Download Picture ................
  • Page 13 Thermal & Optical Bi-spectrum Network Camera User Manual 13.3 Import and Export Configuration File................73 13.4 Export Diagnose Information ..................74 13.5 Reboot .......................... 74 13.6 Restore and Default ...................... 74 13.7 Upgrade ........................74 13.8 View Open Source Software License ................75 13.9 Time and Date .......................

  • Page 14: Chapter 1 Overview

    Thermal & Optical Bi-spectrum Network Camera User Manual Chapter 1 Overview 1.1 Brief Description Thermal & Optical Bi-spectrum network camera equipped with built-in GPU which supports intelligent behavior analysis algorithm, can realize high-precision VCA detection and real-time alarm. It is applied to perimeter defense and fire-prevention purposes in critical infrastructures such as community, villa, construction site, factory, 4S stores, and so on.

  • Page 15: Chapter 2 Device Activation And Accessing

    2.1 Activate the Device via SADP Search and activate the online devices via SADP software. Before You Start Access www.hikvision.com to get SADP software to install. Steps 1. Connect the device to network using the network cable. 2. Run SADP software to search the online devices.

  • Page 16: Login

    Thermal & Optical Bi-spectrum Network Camera User Manual Note The default IP address of the device is 192.168.1.64. You can set the IP address of the PC from 192.168.1.2 to 192.168.1.253 (except 192.168.1.64). For example, you can set the IP address of the PC to 192.168.1.100.

  • Page 17: Illegal Login Lock

    Thermal & Optical Bi-spectrum Network Camera User Manual Operating System Web Browser Operation plug-in installation is not required. Display and operation of certain functions are restricted. For example, Playback and Picture are not available. For detailed restricted function, refer to the actual device.

  • Page 18: Chapter 3 Temperature Measurement

    Thermal & Optical Bi-spectrum Network Camera User Manual Chapter 3 Temperature Measurement When you enable this function, the device measures the actual temperature of the scene. It alarms when temperature exceeds the temperature threshold value. 3.1 Notice This part introduces the notices of configuring temperature measurement function. ●...

  • Page 19: Thermography Configuration Flow Chart

    Thermal & Optical Bi-spectrum Network Camera User Manual 3.2 Thermography Configuration Flow Chart This part introduces the process of configuring temperature measurement. Figure 3-1 Thermography Configuration Flow Chart...

  • Page 20: Automatic Thermography

    Thermal & Optical Bi-spectrum Network Camera User Manual Note Please refer to the Quick Start Guide for detailed information of Installation part in the flow chart. 3.3 Automatic Thermography Configure the temperature measurement parameters and temperature measurement rules. The device can measure the actual temperature and output alarms when temperature exceeds the alarm threshold value.
  • Page 21 Thermal & Optical Bi-spectrum Network Camera User Manual ● Top Left: display the information on the top left of screen. Add Original Data on Capture Check to add data on alarm triggered capture of thermal channel. Picture Quality Set picture quality as high, medium, or low. Add Original Data on Stream Check to add original data on thermal view.

  • Page 22: Set Normal Mode

    Thermal & Optical Bi-spectrum Network Camera User Manual The filter sensitivity can be adjusted. Check Display Filtering Status, and an OSD will be displayed when the function is enabled. Click Restart to restart the algorithm library of reflect light filter. Forklift Filter Enable these functions if there is forklift in the scene, or it may cause false alarm.

  • Page 23: Set Expert Mode

    Thermal & Optical Bi-spectrum Network Camera User Manual When the temperature change exceeds the set sudden change alarm value within the set cycle, the camera triggers an alarm. Note Temperature sudden change alarm is only supported by certain device models. 5.

  • Page 24: Set Thermography Rule

    Thermal & Optical Bi-spectrum Network Camera User Manual 3.3.4 Set Thermography Rule Steps 1. Customize the rule name. 2. Select the rule type to Point, Line, or Area. Then draw a point, line, or area on the interface where the position to be measured. Point Please refer to Point Thermographyfor detailed configuration.

  • Page 25: Point Thermography

    Thermal & Optical Bi-spectrum Network Camera User Manual When the temperature of target exceeds the pre-alarm or alarm threshold, it triggers the pre- alarm or alarm output of the connected device. Area's Temperature Comparison Select two areas and set the comparison rule, and set the temperature difference threshold. The device alarms when the temperature difference meets the setting value.

  • Page 26: Set Shielded Region

    Thermal & Optical Bi-spectrum Network Camera User Manual 3.3.8 Set Shielded Region You can configure areas from being detected. Steps 1. Check Enable Shield Area. 2. Click 3. Drag the mouse in the live view to draw the area. You can drag the corners of the red rectangle area to change its shape and size.

  • Page 27: Chapter 4 Fire And Smoke Detection

    Thermal & Optical Bi-spectrum Network Camera User Manual Chapter 4 Fire and Smoke Detection The device will trigger and upload alarm when detect the fire source or smoke. Fire and smoke detection is applied to fire-prevention purposes in scenic region, forest, tunnel and so on.

  • Page 28: Set Smoke Detection Parameters

    Thermal & Optical Bi-spectrum Network Camera User Manual Detect smoking behavior in the scene. Dynamic Fire Detect the fire source in the scene. Sensitivity The sensitivity of fire detection. The bigger the value is, more easily the fire source can be detected, and the false rate is higher.
  • Page 29 Thermal & Optical Bi-spectrum Network Camera User Manual certain areas. The detail configuration steps show as below. Before You Start Go to Configuration → System → Maintenance → VCA Resource Type, select Temperature Measurement + Behavior Analysis or Temperature Measurement + Fire and Smoke Detection. Steps 1.
  • Page 30 Thermal & Optical Bi-spectrum Network Camera User Manual 9) Check Display Shield Region to show the shielded area in live view. 5. Refer to Set Arming Schedule for setting scheduled time. Refer to Linkage Method Settings for setting linkage method. 6.

  • Page 31: Chapter 5 Open Platform

    Thermal & Optical Bi-spectrum Network Camera User Manual Chapter 5 Open Platform Open platform allows you to install the application for the third-party to develop and run its function and service. Note Only certain device models support the function. 5.1 Set Open Platform You can install the application for the third-party to develop and run its function and service.
  • Page 32 Thermal & Optical Bi-spectrum Network Camera User Manual Figure 5-1 Set VCA Resource...

  • Page 33: Chapter 6 Behavior Analysis

    Thermal & Optical Bi-spectrum Network Camera User Manual Chapter 6 Behavior Analysis The behavior analysis function is used to detect whether there is any target break the VCA rules. The optical camera will track the target or the device will alarm when the VCA rule is triggered. 6.1 Flow Chart of Behavior Analysis The process of configuring the behavior analysis function is described below.

  • Page 34: Set Vca Parameters

    Thermal & Optical Bi-spectrum Network Camera User Manual 6.2 Set VCA Parameters Steps 1. Go to Configuration → VCA → Basic Settings. Display VCA Info. on Stream Select to display target info and rule on stream, the information will be added to the video stream, and the overlay will be displayed if you get live view or play back by the VS Player.

  • Page 35: Calibrate Manually

    Thermal & Optical Bi-spectrum Network Camera User Manual Note You can set a maximum of two decimal places. 4. Click to start calibration. Caution ● The auto calibration starts when the person is totally seen in live view, and ends when the person is in the endpoint.

  • Page 36: Verify The Calibration Result

    Thermal & Optical Bi-spectrum Network Camera User Manual 6. Optional: Click to delete the calibration line. 7. Click Save. Caution ● Separate 4 vertical lines in the optical-axis direction at the close site, middle and far site respectively. ● Separate 4 vertical lines at the left, middle and right of the image respectively. ●...
  • Page 37 Thermal & Optical Bi-spectrum Network Camera User Manual Intrusion If any target intrudes into the pre-defined region longer than the set duration, the alarm will be triggered. Region Entrance If any target enters the pre-defined region, the alarm will be triggered. Region Exiting If any target exits the pre-defined region, the alarm will be triggered.

  • Page 38: Advanced Configuration

    Thermal & Optical Bi-spectrum Network Camera User Manual Note The parameter is available in optical channel. Target Size Filter Settings a suitable target size filter helps to increase detection accuracy. There are two ways to set the filter: ● If your device is successfully calibrated, select Filter by Actual Size and the device will filter targets according to the calibration automatically.
  • Page 39 Thermal & Optical Bi-spectrum Network Camera User Manual Click Restore to restore the parameters to the default. Restart VCA Click Restart to restart the VCA function. Note The settings vary according to different models.

  • Page 40: Chapter 7 Event And Alarm

    Thermal & Optical Bi-spectrum Network Camera User Manual Chapter 7 Event and Alarm This part introduces the configuration of events. The device takes certain response to triggered alarm. Certain events may not be supported by certain device models. 7.1 Set Motion Detection It helps to detect the moving objects in the detection region and trigger the linkage actions.

  • Page 41: Expert Mode

    Thermal & Optical Bi-spectrum Network Camera User Manual Figure 7-1 Set Rules Stop Drawing Stop drawing one area. Clear All Clear all the areas. 4. Optional: You can set the parameters of multiple areas by repeating the above steps. 7.1.2 Expert Mode You can configure the motion detection parameters of day/night switch according to the actual needs.

  • Page 42: Set Video Tampering Alarm

    Thermal & Optical Bi-spectrum Network Camera User Manual 3. Select an Area and click Draw Area. Click and drag the mouse on the live video, then release the mouse to finish drawing one area. Figure 7-2 Set Rules Stop Drawing Finish drawing one area.

  • Page 43: Set Alarm Input

    Thermal & Optical Bi-spectrum Network Camera User Manual Figure 7-3 Set Video Tampering Area 6. Refer to Set Arming Schedule for setting scheduled time. Refer to Linkage Method Settings for setting linkage method. 7. Click Save. 7.3 Set Alarm Input Alarm signal from the external device triggers the corresponding actions of the current device.

  • Page 44: Set Exception Alarm

    Thermal & Optical Bi-spectrum Network Camera User Manual 7.4 Set Exception Alarm Exception such as network disconnection can trigger the device to take corresponding action. Steps 1. Go to Configuration → Event → Basic Event → Exception. 2. Select Exception Type. HDD Full The HDD storage is full.

  • Page 45: Detect Scene Change

    Thermal & Optical Bi-spectrum Network Camera User Manual Sudden Decrease of Sound Intensity Detection Detect sudden decrease of sound intensity. Sensitivity is configurable. 3. Refer to Set Arming Schedule for setting scheduled time. Refer to Linkage Method Settings for setting linkage methods. 4.

  • Page 46: Chapter 8 Arming Schedule And Alarm Linkage

    Thermal & Optical Bi-spectrum Network Camera User Manual Chapter 8 Arming Schedule and Alarm Linkage Arming schedule is a customized time period in which the device performs certain tasks. Alarm linkage is the response to the detected certain incident or target during the scheduled time. 8.1 Set Arming Schedule Set the valid time of the device tasks.

  • Page 47: Ftp/Nas/Memory Card Uploading

    Thermal & Optical Bi-spectrum Network Camera User Manual Manual Alarm You can trigger an alarm output manually. Steps 1. Set the manual alarm parameters. Alarm Output No. Select the alarm output No. according to the alarm interface connected to the external alarm device.

  • Page 48: Send Email

    Thermal & Optical Bi-spectrum Network Camera User Manual Refer to Set Memory Card for memory card storage configuration. 8.2.3 Send Email Check Send Email, and the device sends an email to the designated addresses with alarm information when an alarm event is detected. For email settings, refer to Set Email.

  • Page 49: Notify Surveillance Center

    Thermal & Optical Bi-spectrum Network Camera User Manual well as the image captured when the alarm is triggered. Video Select the video channel and video duration as required. ● 0 s: It will not upload the video of the selected channel. ●...

  • Page 50: Set Flashing Alarm Light Output

    Thermal & Optical Bi-spectrum Network Camera User Manual Note The function is only supported by certain device models. 8.2.7 Set Flashing Alarm Light Output Steps 1. Go to Configuration → Event → Basic Event → Flashing Alarm Light Output. 2. Select a White Light Mode. Mode Description Flashing...

  • Page 51: Chapter 9 Live View

    Thermal & Optical Bi-spectrum Network Camera User Manual Chapter 9 Live View It introduces the live view parameters, function icons and transmission parameters settings. 9.1 Live View Parameters The supported functions vary depending on the model. Note For multichannel devices, select the desired channel first before live view settings. 9.1.1 Window Division ●...

  • Page 52: View Previous/Next Page

    Thermal & Optical Bi-spectrum Network Camera User Manual 9.1.5 View Previous/Next Page When the number of channels surpasses that of live view window division, this function can switch live view among multiple channels. Click to switch live view among multiple channels. 9.1.6 Full Screen This function is used to view the image in full screen mode.

  • Page 53: Lens Parameters Adjustment

    Thermal & Optical Bi-spectrum Network Camera User Manual – For VCA settings, see Fire and Smoke Detection, Temperature Measurement, and Behavior Analysis. Note The function is only supported by certain models. 9.1.12 Lens Parameters Adjustment It is used to adjust the lens focus, zoom and iris. Zoom ●...
  • Page 54 Thermal & Optical Bi-spectrum Network Camera User Manual MULTICAST MULTICAST is suitable for the situation that there are multiple clients. You should set the multicast address for them before selection. HTTP HTTP is suitable for the situation that the third-party needs to get the stream from the device.

  • Page 55: Chapter 10 Video And Audio

    Thermal & Optical Bi-spectrum Network Camera User Manual Chapter 10 Video and Audio This part introduces the configuration of video and audio related parameters. 10.1 Video Settings This part introduces the settings of video parameters, such as, stream type, video encoding, and resolution.

  • Page 56: Bitrate Type And Max. Bitrate

    Thermal & Optical Bi-spectrum Network Camera User Manual and storage. 10.1.4 Bitrate Type and Max. Bitrate Constant Bitrate It means that the stream is compressed and transmitted at a comparatively fixed bitrate. The compression speed is fast, but mosaic may occur on the image. Variable Bitrate It means that the device automatically adjust the bitrate under the set Max.

  • Page 57: Smoothing

    Thermal & Optical Bi-spectrum Network Camera User Manual standard. In comparison to H.264, it offers better video compression at the same resolution, frame rate and image quality. MJPEG Motion JPEG (M-JPEG or MJPEG) is a video compression format in which intraframe coding technology is used.

  • Page 58: Audio Settings

    Thermal & Optical Bi-spectrum Network Camera User Manual Player means the VCA info can be displayed by the dedicated player provided by the manufacturer. Video Video means the VCA info can be displayed by any general video player. 10.1.10 Audio Settings It is a function to set audio parameters such as audio encoding, environment noise filtering.

  • Page 59: Set Roi

    Thermal & Optical Bi-spectrum Network Camera User Manual the monitoring screen. Before You Start ● Make sure the audio input device (pick-up or microphone) and audio output device (speaker) connected to the device is working properly. Refer to specifications of audio input and output devices for device connection.

  • Page 60: Metadata

    Thermal & Optical Bi-spectrum Network Camera User Manual 10.1.13 Metadata Metadata is the raw data that the device collects before algorithm processing. It is often used for the third party integration. Go to Configuration → Video/Audio → Metadata Settings to enable metadata uploading of the desired function for the camera channels.

  • Page 61: Exposure Settings

    Thermal & Optical Bi-spectrum Network Camera User Manual Thermal AGC Mode Choose the AGC mode according to different scenes to balance and improve the image quality. ● Histogram: Choose for scene with obvious WDR and high temperature difference, can improve image contrast and enhance image. E.g. the scene contains both indoor and outdoor scenes.

  • Page 62: Blc

    Thermal & Optical Bi-spectrum Network Camera User Manual 4. Go to Configuration → Image → Display Settings → Day/Night Switch to set supplement light parameters. Smart Supplement Light This feature uses smart image processing technology to reduce overexposure caused by supplement light.

  • Page 63: Defog

    Thermal & Optical Bi-spectrum Network Camera User Manual and Expert modes are selectable. Normal Set the DNR level to control the noise reduction degree. The higher level means stronger reduction degree. Expert Set the DNR level for both space DNR and time DNR to control the noise reduction degree. The higher level means stronger reduction degree.

  • Page 64: Set Target Color

    Thermal & Optical Bi-spectrum Network Camera User Manual 10.2.13 Set Target Color You can set the color of the targets in different temperature ranges to identify the target quickly. Steps 1. Go to Configuration → Image → Display Settings. 2. Select the thermal channel. 3.

  • Page 65: Mirror

    Thermal & Optical Bi-spectrum Network Camera User Manual more detailed and clear. Steps 1. Go to Configuration → Image → Display Settings → Image Enhancement. 2. Select the area of regional image enhancement. You can select OFF to disable this function, or select Custom Area to draw a desired area.

  • Page 66: Osd

    Thermal & Optical Bi-spectrum Network Camera User Manual 10.3 OSD You can customize OSD (On-screen Display) information such as device name, time/date, font, color, and text overlay displayed on video stream. Go to OSD setting page: Configuration → Image → OSD Settings. Set the corresponding parameters, and click Save to take effect.

  • Page 67: Overlay Picture

    Thermal & Optical Bi-spectrum Network Camera User Manual 6. Click Save. Note Up to 4 areas are supported for setting. 10.6 Overlay Picture Overlay a customized picture on live view. Before You Start The picture to overlay has to be in BMP format with 24-bit, and the maximum picture size is 128 × 128 pixel.

  • Page 68: Set Picture In Picture

    Thermal & Optical Bi-spectrum Network Camera User Manual 10.8 Set Picture in Picture You can overlay the images of two channels and view the image of two channels at the same time. Steps 1. Select a channel number. 2. Select the picture in picture mode. Overlap Mode Partial image of thermal channel is displayed on the full screen of optical channel.

  • Page 69: Chapter 11 Video Recording And Picture Capture

    Thermal & Optical Bi-spectrum Network Camera User Manual Chapter 11 Video Recording and Picture Capture This part introduces the operations of capturing video clips and snapshots, playback, and downloading captured files. 11.1 Storage Settings This part introduces the configuration of several common storage paths. 11.1.1 Set Memory Card If you choose to store the files to memory card, make sure you insert and format the memory card in advance.

  • Page 70: Set Ftp

    Thermal & Optical Bi-spectrum Network Camera User Manual Steps 1. Go to NAS setting page: Configuration → Storage → Storage Management → Net HDD. 2. Click HDD No.. Enter the server address and file path for the disk. Server Address The IP address of the network disk.

  • Page 71: Set Cloud Storage

    Thermal & Optical Bi-spectrum Network Camera User Manual 3. Click Upload Picture or Upload Video to enable uploading snapshots or videos to the FTP server. 4. Click Test to verify the FTP server. 5. Click Save. 11.1.4 Set Cloud Storage It helps to upload the captured pictures and data to the cloud.

  • Page 72: Record Automatically

    Thermal & Optical Bi-spectrum Network Camera User Manual downloading recorded files. 11.2.1 Record Automatically This function can record video automatically during configured time periods. Before You Start Select Trigger Recording in event settings for each record type except Continuous. See Event and Alarm for details.

  • Page 73: Record Manually

    Thermal & Optical Bi-spectrum Network Camera User Manual 5. Set schedule for the selected record type. Refer to Set Arming Schedule for the setting operation. 6. Click Advanced to set the advanced settings. Overwrite Enable Overwrite to overwrite the video records when the storage space is full. Otherwise the camera cannot record new videos.

  • Page 74: Capture Configuration

    Thermal & Optical Bi-spectrum Network Camera User Manual – Click to clip video files. – Click to play video files in full screen. Press ESC to exit full screen. Note Go to Configuration → Local, click Save clips to to change the saving path of clipped video files. 5.

  • Page 75: Capture Manually

    Thermal & Optical Bi-spectrum Network Camera User Manual 11.3.2 Capture Manually Steps 1. Go to Configuration → Local. 2. Set the Image Format and saving path to for snapshots. JPEG The picture size of this format is comparatively small, which is better for network transmission.

  • Page 76: Chapter 12 Network Settings

    Thermal & Optical Bi-spectrum Network Camera User Manual Chapter 12 Network Settings 12.1 TCP/IP TCP/IP settings must be properly configured before you operate the device over network. IPv4 and IPv6 are both supported. Both versions can be configured simultaneously without conflicting to each other.

  • Page 77: Multicast Discovery

    Thermal & Optical Bi-spectrum Network Camera User Manual Manual Input IPv6 Address, IPv6 Subnet, IPv6 Default Gateway. Consult the network administrator for required information. It stands for maximum transmission unit. It is the size of the largest protocol data unit that can be communicated in a single network layer transaction.

  • Page 78: Port Mapping

    Thermal & Optical Bi-spectrum Network Camera User Manual TCP-based full-duplex communication protocol port for plug-in free preview. WebSockets Port TCP-based full-duplex communication protocol port for plug-in free preview. Certificate verification is required to ensure the secure access. Note ● Enhanced SDK Service Port, WebSocket Port, and WebSockets Port are only supported by certain models.

  • Page 79: Set Manual Port Mapping

    Thermal & Optical Bi-spectrum Network Camera User Manual 12.3.2 Set Manual Port Mapping Steps 1. Check Enable UPnP™, and choose a friendly name for the device, or you can use the default name. 2. Select the port mapping mode to Manual, and set the external port to be the same as the internal port.

  • Page 80: Access To Device Via Domain Name

    Thermal & Optical Bi-spectrum Network Camera User Manual Note The SNMP version you select should be the same as that of the SNMP software. And you also need to use the different version according to the security level required. SNMP v1 is not secure and SNMP v2 requires password for access.

  • Page 81: Enable Hik-Connect Service On Camera

    Thermal & Optical Bi-spectrum Network Camera User Manual the device. Steps 1. Go to Configuration → Network → Basic Settings → PPPoE. 2. Check Enable PPPoE. 3. Set the PPPoE parameters. Dynamic IP After successful dial-up, the dynamic IP address of the WAN is displayed. User Name User name for dial-up network access.

  • Page 82: Enable Hik-Connect Service Via Sadp Software

    Connect the camera to network with network cables. Steps 1. Get and install Hik-Connect application by the following ways. Visit https://appstore.hikvision.com to download the application according to your mobile phone system. Visit the official site of our company. Then go to Support → Hikvision App Store. Scan...

  • Page 83: Set Isup

    If errors like "Unknown app" occur during the installation, solve the problem in two ways. Visit https://appstore.hikvision.com/static/help/index.html to refer to the troubleshooting. Visit https://appstore.hikvision.com/, and click Installation Help at the upper right corner of the interface to refer to the troubleshooting.

  • Page 84: Set Alarm Host

    Thermal & Optical Bi-spectrum Network Camera User Manual configure the user settings to enhance the network security. Steps 1. Go to Configuration → Network → Advanced Settings → Integration Protocol. 2. Check Enable Open Network Video Interface. 3. Click Add to configure the Open Network Video Interface user. Delete Delete the selected Open Network Video Interface user.

  • Page 85: Set Network Service

    Thermal & Optical Bi-spectrum Network Camera User Manual 12.13 Set Network Service You can control the ON/OFF status of certain protocol as desired. Steps Note This function varies according to different models. 1. Go to Configuration → Network → Advanced Settings → Network Service. 2.

  • Page 86: Chapter 13 System And Security

    Thermal & Optical Bi-spectrum Network Camera User Manual Chapter 13 System and Security It introduces system maintenance, system settings and security management, and explains how to configure relevant parameters. 13.1 View Device Information You can view device information, such as Device No., Model, Serial No. and Firmware Version. Enter Configuration →...

  • Page 87: Export Diagnose Information

    Thermal & Optical Bi-spectrum Network Camera User Manual 13.4 Export Diagnose Information Diagnose information includes running log, system information, hardware information. Go to Configuration → System → Maintenance → Upgrade & Maintenance, and click Diagnose Information to export diagnose information of the device. 13.5 Reboot You can reboot the device via browser.

  • Page 88: View Open Source Software License

    Thermal & Optical Bi-spectrum Network Camera User Manual 2. Choose one method to upgrade. Firmware Locate the exact path of the upgrade file. Firmware Directory Locate the directory which the upgrade file belongs to. 3. Click Browse to select the upgrade file. 4.

  • Page 89: Set Dst

    Thermal & Optical Bi-spectrum Network Camera User Manual Note Server Address is NTP server IP address. 5. Click Test to test server connection. 6. Click Save. 13.9.3 Set DST If the region where the device is located adopts Daylight Saving Time (DST), you can set this function.

  • Page 90: Set Same Unit

    Thermal & Optical Bi-spectrum Network Camera User Manual Note You should keep the parameters of the device and the computer or terminal all the same. 3. Click Save. 13.12 Set Same Unit Set the same temperature unit and distance unit. When you enable this function, the unit cannot be configured separately in other setting pages Steps 1.

  • Page 91: Security Audit Log

    Thermal & Optical Bi-spectrum Network Camera User Manual 13.13.2 Security Audit Log The security audit logs refer to the security operation logs. You can search and analyze the security log files of the device so as to find out the illegal intrusion and troubleshoot the security events. Security audit logs can be saved on device internal storage.

  • Page 92: Certificate Management

    Thermal & Optical Bi-spectrum Network Camera User Manual 5. Click Save. 13.13.4 Certificate Management It helps to manage the server/client certificates and CA certificate, and to send an alarm if the certificates are close to expiry date, or are expired/abnormal. Note The function is only supported by certain device models.
  • Page 93 Thermal & Optical Bi-spectrum Network Camera User Manual 6. Click OK. 7. Optional: Click Export to export the certificate, or click Delete to delete the certificate to recreate a certificate, or click Certificate Properties to view the certificate details. Note ●...

  • Page 94: Control Timeout Settings

    Thermal & Optical Bi-spectrum Network Camera User Manual ● If you set the reminding day before expiration to 1, and the detection time to 10:00, and the certificate will expire in 9:00 the next day, the camera will remind you in 10:00 the first day. 3.

  • Page 95: Set Ieee 802.1X

    Thermal & Optical Bi-spectrum Network Camera User Manual the priority of data sending. Note QoS needs support from network device such as router and switch. Steps 1. Go to Configuration → Network → Advanced Configuration → QoS. 2. Set Video/Audio DSCP, Alarm DSCP and Management DSCP. Note Network can identify the priority of data transmission.
  • Page 96 Thermal & Optical Bi-spectrum Network Camera User Manual Administrator The administrator has the authority to all operations and can add users and operators and assign permission. User Users can be assigned permission of viewing live video, setting PTZ parameters, and changing their own passwords, but no permission for other operations.

  • Page 97: Chapter 14 Appendix

    0.98 Hard Paperboard 0.90 White Paper 0.90 Water 0.96 14.2 Device Command Scan the following QR code to get device common serial port commands. Note that the command list contains the commonly used serial port commands for Hikvision thermal cameras.

  • Page 98: Device Communication Matrix

    Thermal & Optical Bi-spectrum Network Camera User Manual 14.3 Device Communication Matrix Scan the following QR code to get device communication matrix. Note that the matrix contains all communication ports of Hikvision thermal cameras. 14.4 FAQ Scan the following QR code to get device common FAQ.

This manual is also suitable for:

Ds-2td2667-35/piDs-2td2667-35/pDs-2td2667-25/pyDs-2td2667-25/pDs-2td2637t-7/qyDs-2td2637t-15/p ... Show all

Table of Contents