HIKVISION DS-2TD2637T-7/P User Manual page 74

Thermal Optical Bi-spectrum Network Camera User Manual
Rule Type
Line a. Click
Crossing b. You can drag end points of the line to adjust the position and length.
c. Set the crossing direction. Bidirectional, A-to-B, or B-to-A are selectable.
d. Set Sensitivity. The higher the value is, the easier the target can be
Intrusion a. Click
b. Set Duration. When a target intrudes into the set area and stays in the area
c. Set Sensitivity. The higher the value is, the easier the target can be
Region a. Click
Entrance
and Region
Exit
b. Target that enters or exits the set area triggers the region entrance or region
4) Set other parameters for the rule.
Target Detection
You are recommended to select the target as Human & Vehicle.
Scene Mode
The scene mode is set to be General by default. Select Distant View when you are far from
the targets. Select Leaves Interfered View when there are shaking targets in the scene,
such as leaves.
Note
In distance view, the device cannot classify the target with pixels less than 10*10. The
target will be recognized as human directly. So the selection of this item will increase
trigger false alarm rate but decrease missing alarm rate.
Table 7-1 Configure VCA Rules
How to Draw and What Parameters to Set
to draw a line in the live view.
detected.
to draw an area in the live view. Right click the mouse to finish
drawing. It is recommended to draw three different areas covering the
whole detection scene from near to far.
Note
The recommended drawing is optional for some camera models, refer to
the pop-up operation guide after you checked Intelligent Analysis.
for more than the set duration, the device triggers an intrusion alarm.
detected.
to draw an area in the live view. Right click the mouse to finish
drawing. It is recommended to draw three different areas covering the
whole detection scene from near to far.
Note
The recommended drawing is optional for some camera models, refer to
the pop-up operation guide after you checked Intelligent Analysis.
exit alarm.
59