Set Audible Alarm Output; Set Flashing Alarm Light Output - HIKVISION DS-2TD2637T-7/P User Manual

Thermal Optical Bi-spectrum Network Camera User Manual
For device with more than one camera channels, you can set one or more channels to take
recordings if needed.
For recording settings, refer to Video Recording and Picture Capture .

9.2.6 Set Audible Alarm Output

When the device detects targets in the detection area, audible alarm can be triggered as a
warning.
Steps
1. Go to Configuration → Event → Basic Event → Audible Alarm Output .
2. Select an Alarm Type.
3. Select Sound Type and set related parameters.
- Select Warning and its contents. Set the alarm times you need.
- Select Custom Audio. You can select a custom audio file from the drop-down list. If no file is
available, you can click Add to upload an audio file that meets the requirement. Up to six
audio files can be uploaded, and each audio file shall not exceed 512 KB.
4. Optional: Click Test to play the selected audio file on the device.
5. Set arming schedule for audible alarm. See Set Arming Schedule for details.
6. Click Save.
Note
The function is only supported by certain device models.

9.2.7 Set Flashing Alarm Light Output

Steps
1. Go to Configuration → Event → Basic Event → Flashing Alarm Light Output .
2. Select a White Light Mode.
Mode Description
Flashing Alarm triggers the light to flash for a certain duration. Set the flashing speed in
Flashing Frequency.
Solid Alarm triggers the light to turn on for a certain duration.
3. Set the light action duration and the brightness.
Flashing Duration
The time period of light on or light flashing when one alarm happens.
Brightness
The brightness of the light.
4. Edit the arming schedule.
5. Click Save.
75