Lenovo Flex System x440 Compute Node Installation And Service Manual page 856

User Response:
Complete the following steps:
1. Check IMM/chassis event log. This event should immediately precede 0068002 error. Resolve that
event or any other battery related errors.
2. Use F1 Setup to reset date and time. If problem returns after a system reset, replace CMOS battery.
3. If problem persists then check the IBM support site for an applicable service bulletin or firmware
update that applies to this error.
4. Replace the system board.
• W.3058009: [W.3058009] DRIVER HEALTH PROTOCOL: Missing Configuraiton. Requires Change
Settings From F1.
[W.3058009] DRIVER HEALTH PROTOCOL: Missing Configuraiton. Requires Change Settings From F1.
Severity: Warning
User Response:
Complete the following steps:
1. Go to the Setup Utility (System Settings -> Settings -> Driver Health Status List) and find a driver/
controller reporting Configuration Required status.
2. Search for the driver menu from System Settings and change settings appropriately.
3. Save settings and restart system.
• W.305800A: [W.305800A] DRIVER HEALTH PROTOCOL: Reports 'Failed' Status Controller.
[W.305800A] DRIVER HEALTH PROTOCOL: Reports 'Failed' Status Controller.
Severity: Warning
User Response:
Complete the following steps:
1. Reboot the system.
2. If problem persists, switch to backup UEFI or update the current UEFI image.
3. Replace the system board.
• W.305800B: [W.305800B] DRIVER HEALTH PROTOCOL: Reports 'Reboot' Required Controller.
[W.305800B] DRIVER HEALTH PROTOCOL: Reports 'Reboot' Required Controller.
Severity: Warning
User Response:
Complete the following steps:
1. No action required. The system will reboot at the end of POST.
2. If the problem persists, switch to the backup UEFI image or update the current UEFI image.
3. Replace the system board.
• W.305800C: [W.305800C] DRIVER HEALTH PROTOCOL: Reports 'System Shutdown' Required
Controller.
[W.305800C] DRIVER HEALTH PROTOCOL: Reports 'System Shutdown' Required Controller.
Severity: Warning
User Response:
Complete the following steps:
Lenovo Flex System x440 Compute NodeInstallation and Service Guide
846