Lenovo Flex System x440 Compute Node Installation And Service Manual page 390

SNMP Trap ID
5
CIM Information
Prefix: PLAT ID: 0164
User Response
Complete the following steps until the problem is solved:
1. Check the Support Portal
2. Check the Support Portal
3. Replace the drive.
4. Check for any other RAID-related errors.
• 806f010d-0402ffff : The Drive Drive 2 has been disabled due to a detected fault.
The hard disk drive controller has detected a fault in hard disk drive 2. Hard disk drive 2 is now defunct.
May also be shown as 806f010d0402ffff or 0x806f010d0402ffff
Severity
Error
Serviceable
Yes
Automatically notify support
Yes
Alert Category
Critical - Hard Disk drive
SNMP Trap ID
5
CIM Information
Prefix: PLAT ID: 0164
User Response
Complete the following steps until the problem is solved:
1. Check the Support Portal
2. Check the Support Portal
3. Replace the drive.
4. Check for any other RAID related errors.
• 806f010d-0403ffff : The Drive Drive 3 has been disabled due to a detected fault.
The hard disk drive controller has detected a fault in hard disk drive 3. Hard disk drive 3 is now defunct.
May also be shown as 806f010d0403ffff or 0x806f010d0403ffff
Severity
Error
Serviceable
Yes
Automatically notify support
Yes
Alert Category
Lenovo Flex System x440 Compute NodeInstallation and Service Guide
380
for service bulletins and RETAIN tips related to your drive.
for firmware updates related to your drive.
for service bulletins and RETAIN tips related to your drive.
for firmware updates related to your drive.