Lenovo Flex System x440 Compute Node Installation And Service Manual page 325

• 80070301-030402ff : Sensor CPU 4 Overtemp has gone to Nonrecoverable state from a less severe
state.
The temperature of microprocessor 4 has exceeded its specified threshold, causing a hard shutdown of
the compute node.
May also be shown as 80070301030402ff or 0x80070301030402ff
Severity
Error
Serviceable
Yes
Automatically notify support
No
Alert Category
Critical - Temperature
SNMP Trap ID
0
CIM Information
Prefix: PLAT ID: 0524
User Response
Complete the following steps until the problem is solved:
1. Check the Chassis Management Module or Flex System Manager event log for any fan- or
cooling-related issues.
2. Make sure that the airflow at the front and rear of the chassis is not obstructed and that fillers are
in place and correctly installed.
3. Make sure that the room temperature is within operating specifications.
4. Make sure that the microprocessor 4 heat sink is securely installed.
5. Make sure that the microprocessor 4 heat sink is installed correctly and the thermal material is
correctly applied.
6. Replace microprocessor 4.
• 80070301-0304ffff : Sensor CPU 4 Overtemp has gone to Nonrecoverable state from a less severe
state.
The temperature of microprocessor 4 has exceeded its specified threshold, causing a hard shutdown of
the compute node.
May also be shown as 800703010304ffff or 0x800703010304ffff
Severity
Error
Serviceable
Yes
Automatically notify support
No
Alert Category
Critical - Temperature
SNMP Trap ID
0
.
Chapter 6 Troubleshooting
315