Lenovo Flex System x440 Compute Node Installation And Service Manual page 46

asu set SYSTEM_PROD_DATA.SysInfoSerialNum zzzzzzz
where zzzzzzz is the 7-character serial number of the compute node.
Step 3. Enter the following command:
asu set SYSTEM_PROD_DATA.SysEncloseAssetTag
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
where aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa is the 33-character asset tag number of the compute
node.
Step 4. Restart the IMM.
Step 5. Restart the server.
Locally: LAN over USB
If you omit any optional parameter, the default value is used. If one or more default values are used and the
ASU cannot access the IMM2 by using the LAN over USB access method, the ASU automatically uses the
KCS access method.
To update the UUID, in the ASU command-line interface, enter the following command:
asu set SYSTEM_PROD_DATA.SysInfoUUID uuid
where:
uuid
is the user-assigned hexadecimal value, up to 16 bytes, that identifies the compute node.
userid
is the IMM2 account name (1 of 12 accounts). The default is USERID.
password
is the IMM2 account password (1 of 12 accounts). The default is PASSW0RD (with a zero, not the letter
O).
To update the DMI/SMBIOS data, complete the following steps:
Step 1. In the ASU command-line interface, enter the following command:
asu set SYSTEM_PROD_DATA.SysInfoProdName xxxxyyy [--host ipaddress]
where:
xxxx
is the 4-digit machine type of the compute node.
yyy
is the 3-digit model number of the compute node.
ipaddress
is the internal LAN/USB IP address of the IMM2. The default is 169.254.95.118.
userid
is the IMM2 account name (1 of 12 accounts). The default is USERID.
password
is the IMM2 account password (1 of 12 accounts). The default is PASSW0RD (with a zero, not
the letter O).
Step 2. Enter the following command:
asu set SYSTEM_PROD_DATA.SysInfoSerialNum zzzzzzz [--host ipaddress]
Lenovo Flex System x440 Compute NodeInstallation and Service Guide
36
[--user userid][--password password]
[--user userid][--password password]
[--user userid][--password password]