Lenovo Flex System x440 Compute Node Installation And Service Manual page 226

The server does not support the installed IMM firmware version.
May also be shown as 4000001f00000000 or 0x4000001f00000000
Severity
Error
Serviceable
No
Automatically notify support
No
Alert Category
System - other
SNMP Trap ID
22
CIM Information
Prefix: IMM ID: 0031
User Response
Update the IMM firmware to a version that the server supports. Important: Some cluster solutions
require specific code levels or coordinated code updates. If the device is part of a cluster solution,
verify that the latest level of code is supported for the cluster solution before you update the code.
Related links
– Updating firmware and device drivers
– IBM Flex System and IBM PureFlex Firmware Updates Best Practices
• 40000020-00000000 : Management Controller [arg1] Reset was caused by restoring default values.
The default configuration has been restored to the Integrated Management Module.
May also be shown as 4000002000000000 or 0x4000002000000000
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
none
SNMP Trap ID
CIM Information
Prefix: IMM ID: 0032
User Response
Information only; no action is required.
• 40000021-00000000 : Management Controller [arg1] clock has been set from NTP server [arg2].
The IMM clock has been set to the date and time that are provided by the Network Time Protocol server.
May also be shown as 4000002100000000 or 0x4000002100000000
Lenovo Flex System x440 Compute NodeInstallation and Service Guide
216