Lenovo Flex System x440 Compute Node Installation And Service Manual page 153

1. Close the media tray and wait for 15 seconds for the media to be recognized. Run the test again.
2. Insert a new CD or DVD into the drive and wait for 15 seconds for the media to be recognized.
Rerun the test.
3. Check the drive cabling for loose or broken connections at both ends or damage to the cable.
Replace the cable if damage is present.
4. Run the test again.
5. If failure remains, refer to "Troubleshooting by symptom" in the system "Installation and Service
Guide" for the next corrective action.
Related links
– Lenovo Support website
–
Latest level of DSA
• 215-901-000 : Optical Drive Test Aborted
Optical Drive Test Aborted. Drive media is not detected.
Recoverable
No
Severity
Warning
Serviceable
Yes
Automatically notify support
No
User Response
Complete the following steps:
1. Insert a new CD or DVD into the drive and wait for 15 seconds for the media to be recognized.
Rerun the test.
2. Check the drive cabling for loose or broken connections at both ends or damage to the cable.
Replace the cable if damage is present.
3. Run the test again.
4. If failure remains, refer to "Troubleshooting by symptom" in the system "Installation and Service
Guide" for the next corrective action.
Related links
–
Lenovo Support website
– Latest level of DSA
• 215-902-000 : Optical Drive Test Failed
Optical Drive Test Failed. Read miscompare.
Recoverable
No
Severity
Error
Serviceable
Yes
Automatically notify support
No
User Response
.
Chapter 6 Troubleshooting
143