Server Chassis Features - Supermicro SUPERSERVER 6011H User Manual

SUPERSERVER 6011H User's Manual
ATI Rage XL 8MB PCI graphics controller driver
LAN driver
SCSI driver
!
SuperServer 6011H User's Manual
* Type and number depends upon the configuration ordered.
** SCSI components are not included on the 6011HI model. All information
in this manual relating to the SCSI subsystem and SCSI drives do not
apply to the 6011HI. For information on installing/removing IDE drives on
the 6011HI, refer to Section 6-4.
1-2

Server Chassis Features

The SuperServer 6011H is a high-end, scaleable 1U rackmount server plat-
form designed with today's most state-of-the-art features. The following is
a general outline of the main features of the SC810, a 1U chassis optimized
for the use of riser cards.
System Power
When configured as a SuperServer 6011H, the SC810 chassis includes a
250W power supply.
SCSI Subsystem
The SCSI subsystem supports two 80-pin SCA Ultra160 SCSI hard drives.
(Any standard 1" drives are supported.
ment.) The SCSI drives are connected to an SCA backplane that provides
power, bus termination and configuration settings.
also hot-swap units.
Control Panel
The SC810's control panel provides important system monitoring and control
information. LEDs indicate power on, network activity, hard disk drive ac-
tivity and system overheat conditions.
main power button and a system reset button.
SCA = Single Connection Attach-
The control panel also includes a
1-2
The SCSI drives are