SUPERSERVER 6011H User's Manual
Overheat LED
The Overheat LED connection is
located on pins 7 and 8 of JF1. It
is used to provide advanced
warning of chassis overheating.
Refer to the table on the right for
pin definitions.
NIC1 LED
The Network Interface Controller 1
LED connection is located on pins
11 and 12 of JF1. This LED dis-
plays network activity on LED1.
Refer to the table on the right for
pin definitions.
NIC2 LED
The Network Interface Controller 2
LED connection is located on pins
9 and 10 of JF1.
plays network activity on LED2.
Refer to the table on the right for
pin definitions.
Hard Drive LED
The Hard Drive LED connection is
located on pins 13 and 14 of JF1.
This LED displays hard disk activ-
ity. Refer to the table on the right
for pin definitions.
This LED dis-
5-14
Overheat LED
Pin Definitions
(JF1)
Pin
Number
Definition
7
5V
8
Control
NIC1 L ED Pin
Definitions (JF1)
Pin
Number
Definition
11
3V
12
Control
NIC2 L ED Pin
Definitions (JF1)
Pin
Number
Definition
9
3V
10
Control
HDD L ED Pin
Definitions (JF1)
Pin
Number
Definition
13
+5V
14
Control