Table of Contents
Advertisement
SUPERSERVER 6011H User's Manual
Checkpoint
A2h
A3h
A4h
A5h
A7h
A8h
A9h
Aah
Abh
B0h
B1h
00h
Code Description
Num Lock key next. Issuing the keyboard ID command
next.
Displaying any soft errors next.
The soft error display has completed. Setting the
keyboard typematic rate next.
The keyboard typematic rate is set. Programming the
memory wait states next.
Memory wait state programming is over. Clearing the
screen and enabling parity and the NMI next.
NMI and parity enabled. Performing any initialization
required before passing control to the adaptor ROM at
E000 next.
Initialization before passing control to the adaptor ROM
at E000h completed. Passing control to the adaptor
ROM at E000h next.
Returned from adaptor ROM at E000h control. Perform-
ing any initialization required after the E000 option ROM
had control next.
Initialization after E000 option ROM control has
completed. Displaying the system configuration next.
Uncompressing the DMI data and executing DMI POST
initialization next.
The system configuration is displayed.
Copying any code to specific areas.
Code copying to specific areas is done. Passing control
to INT 19h boot loader next.
B-8
Advertisement
Table of Contents
