Table of Contents
Advertisement
Introduction to the SuperServer 6011H
1-1
Overview
The Supermicro SuperServer 6011H is a high-end dual processor, 1U
rackmount server that features some of the most advanced technology
currently available. The SuperServer 6011H is comprised of two main sub-
systems: the SC810 1U rackmount chassis and the P3TDER+, a 370-pin
Pentium III Tualatin dual processor mainboard. Please refer to our web site
for information on operating systems that have been certified for use with
the SuperServer 6011H. (www.supermicro.com)
In addition to the mainboard and chassis, various hardware components
may have been included with your SuperServer 6011H, as listed below:
!
Up to two (2) 370-pin Pentium III Tualatin processors*
!
Two (2) CPU heat sinks* (SNK-023)
!
Up to 4 GB ECC registered SDRAM main memory*
!
One (1) 1.44" floppy drive
!
One (1) slim CD-ROM drive
!
One (1) SCA SCSI backplane**
!
Two (2) SCA 1-inch high SCSI drive carriers**
!
SCSI Accessories**
One (1) internal 68-pin Ultra160 SCSI cable for SCA SCSI backplane
One (1) set of SCSI driver diskettes
One (1) SCSI manual
!
Rackmount hardware (with screws):
Two (2) rack rail assemblies
Six (6) brackets for mounting the rack rails to a rack/telco rack
!
One (1) CD-ROM containing drivers and utilities:
Intel LANDesk Client Manager
Chapter 1
1-1
Chapter 1: Introduction
Advertisement
Table of Contents
