SUPERSERVER 6011H User's Manual
2.
Installing/removing hot-swap SCSI drives:
One SCSI drive bay is located in the front of the chassis, making it easily
accessible for installation and removal. The SCSI drive is a hot-swap
unit, meaning that it can be installed and removed while the system is
running. To remove a SCSI drive, first push the release button located
beside the drive's LEDs, then swing the colored handle fully out and use
it to pull the unit straight out (see Figure 6-5).
Handle
Important:
!
drive bays to maintain proper airflow.
Release Button
Figure 6-5.
Removing SCSI Drives
All SCSI drive carriers must remain in their
6-6