Pci Pnp Setup - Supermicro SUPERSERVER 6011H User Manual

SUPERSERVER 6011H User's Manual
EMM 386
This settings for this option are Enabled and Disabled.
Watchdog Timer
The settings for this option are Disabled, 2 minutes, 5 minutes, 10 minutes
and 15 minutes.
7-6

PCI PnP Setup

Choose PCI/PnP Setup from the AMIBIOS Setup main menu. All PCI/PnP
options are described in this section. The PCI/PnP Setup screen is shown
below.
Main Advanced
Plug & Play O/S
Reset Config Data
PCI Latency Timer
Allocate IRQ to VGA
Palette Snooping
PCI IDE BusMaster
USB Controller
IRQ3
IRQ4
IRQ5
IRQ7
IRQ9
IRQ10
IRQ11
IRQ14
IRQ15
V07.00 (C)Copyright 1985-2001, American Megatrends, Inc.
Plug & Play O/S
The settings for this option are Yes and No. Selecting Yes will allow the
operating system to configure PnP devices not required for setup (provided
your system has an O/S that supports PnP devices). Selecting No lets BIOS
configure PnP devices.
BIOS SETUP UTILITY
Chipset PCIPnP
[No]
[No]
[64]
[Yes]
[Disabled]
[Disabled]
[Enabled]
[Disabled]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
7-18
Power Boot Security
No: lets the BIOS
configure all the
devices in the system.
Yes: lets the
operating system
configure Plug and
Play (PnP) devices not
required for boot if
your system has a Plug
and Play operating
system.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Exit