Security Setup - Supermicro SUPERSERVER 6011H User Manual

SUPERSERVER 6011H User's Manual
7-9

Security Setup

Choose Security Setup from the AMIBIOS Setup main menu. All Security
Setup options are described in this section. The Security Setup screen is
shown below.
Main Advanced
Supervisor Password
User Password
> Change Supervisor Password
> Change User Password
> Clear User Password
Boot Sector Virus Protection
V02.03 (C)Copyright 1985-2000, American Megatrends, Inc.
Supervisor Password
User Password
AMIBIOS provides both Supervisor and User password functions. If you
use both passwords, the Supervisor password must be set first. The sys-
tem can be configured so that all users must enter a password every time
the system boots or when AMIBIOS Setup is executed, using either or both
the Supervisor password or/and the User password. The Supervisor and
User passwords activate two different levels of password security. If you
select password support, you are prompted for a one to six character
password. Type the password on the keyboard. The password does not
appear on the screen when typed. Make sure you write it down. If you
forget it, you must clear CMOS and reconfigure. Remember your Pass-
BIOS SETUP UTILITY
Chipset PCIPnP
: Not Installed
: Not Installed
[Disabled]
7-24
Power Boot Security
Install or Change the
password.
Enter
F1
F10
ESC
Exit
Select Screen
Select Item
Go to Sub Screen
General Help
Save and Exit
Exit