Table of Contents
Advertisement
SUPERSERVER 6011H User's Manual
Connecting the Control Panel
JF1 contains header pins for various front control panel connectors. See
Figure 5-1 for the pin locations of the various front control panel buttons
and LED indicators. Please note that even and odd numbered pins are on
opposite sides of each header.
All JF1 wires have been bundled into single ribbon cable to simplify their
connection. Make sure the red wire plugs into pin 1 as marked on the
board. The other end connects to the Control Panel printed circuit board,
located just behind the system status LEDs in the chassis. The control
signals are all on the even numbered pins.
See Section 5-8 for details and pin descriptions of the JF1 connnector.
Figure 5-1. P3TDER+ Front Control Panel Header Pins
16
15
Control
5V
Control
5V
Control
3V
Control
3V
Control
5V
Reset
Ground
Ground
Pwr
2
1
JF1
5-4
Power LED
HDD LED
NIC1 LED
NIC2 LED
Overheat LED
X
Reset Button
Power Button
Advertisement
Table of Contents
