Front Side Bus Speed; Scsi Termination Enable/Disable; Watch Dog Enable/Disable - Supermicro SUPERSERVER 6011H User Manual

SUPERSERVER 6011H User's Manual

Front Side Bus Speed

CPU speed = FSB x Core/Bus ratio
The FSB Speed is set with JP1 on
the P3TDER+ (see the table on the
right). See the previous section
for the CPU Speed setting (setting
the CPU speed is usually not nec-
essary.
SCSI Termination Enable/
Disable
The SCSI Termination jumper JP64
allows you to enable or disable
termination for the SCSI connec-
tors. The normal (default) position
is open to enable SCSI termination.
See the table on the right for
jumper settings.

Watch Dog Enable/Disable

JP73 allows you to enable or dis-
able the Watch Dog feature. The
normal (default) position is open to
disable the Watch Dog timer and
enable the speaker.
setting works in conjunction with
the setting in BIOS. See the table
on the right for jumper settings.
This jumper
5-20
Front Side Bus Speed
Jumper Settings (JP1)
Jumper
Position Definition
1-2 Auto
2-3 100 MHz
OFF 133 MHz
Note: The Auto setting allows
the CPU to set the speed.
SCSI T ermination
Enable/Disable
Jumper Settings
(JP64)
Jumper
Position Definition
Open Enabled
Closed Disabled
Watch Dog
Enable/Disable
Jumper Settings
(JP73)
Jumper
Position Definition
Open Disabled
Closed Enabled