Table of Contents
Advertisement
S
S
UPER
ERVER 1028U-E1CR(4/TP)+ User's Manual
1-3
Server Chassis Features
The 1028U-E1CR(4/TP)+ server is built upon the SC119UE1C-R751-T chassis. The
following is a general outline of the main features.
System Power
The chassis features a redundant 750 W high-efficiency Platinum-level digitial power
supply consisting of two hot-plug power modules, so one may be removed without
powering down the system.
Drives
The default chassis supports ten hot-swap 2.5" SATA hard disk drives. Using
expansion cards, the drive bays can be configured to support ten SAS3.
PCI Expansion Slots
The system supports two full-height, full-length PCI-Express expansion cards,
and one low profile card. The pre-installed Ultra riser card offers another internal
low profile card slot. Riser cards and brackets are required. Additional fans are
recommended; see Section 6-7.
Front Control Panel
The chassis front control panel provides system monitoring lights and power control
buttons.
Cooling System
The system has an innovative cooling design that features four to eight sets of
4-cm counter-rotating fans located in the middle section of the chassis. Fan speed
may be controlled by IPMI to respond to fluctuations in system temperature. An air
shroud directs air flow to components the need cooling. The power supply module
also includes a cooling fan.
1-4
Advertisement
Table of Contents
