Table of Contents
Advertisement
1.4 Server Chassis Features
Control Panel
The switches and LEDs located on the control panel are described below. See Chapter 4 for
details on the control panel connections.
Item
Feature
1
Power Button
2
Reset Button
3
Power LED
4
HDD LED
5
NIC2 LED
6
NIC1 LED
7
Power Fail LED
8
Universal Information LED
1
2
3
5
7
Figure 1-1. Control Panel View
Control Panel Features
Description
The main power button is used to apply or remove power from the
power supply to the server. Turning off system power with this button
removes the main power but maintains standby power. To perform
many maintenance tasks, you must also unplug system before
servicing
The reset button is used to reboot the system
Indicates power is being supplied to the system power supply. This
LED should normally be illuminated when the system is operating.
Indicates activity on a hard drive when flashing.
Indicates network activity on LAN port 2 when flashing
Indicates network activity on LAN port 1 when flashing
Indicates a power supply module has failed.
See table below for details.
11
Chapter 1: Introduction
4
6
8
Advertisement
Table of Contents
