7-10 Exit Setup - Supermicro SUPERSERVER 6011H User Manual

SUPERSERVER 6011H User's Manual

7-10 Exit Setup

Choose Exit Setup from the AMIBIOS Setup main menu. All Exit Setup op-
tions are described in this section. The Exit Setup screen is shown below.
Main Advanced
> Exit Saving Changes
> Exit Discarding Changes
> Load Optimal Defaults
> Load Fail-Safe Defaults
> Discard Changes
V02.03 (C)Copyright 1985-2000, American Megatrends, Inc.
Exit Saving Changes
Highlighting this setting and then pressing <Enter> will save any changes
you made in the BIOS Setup program and then exit. Your system should
then continue with the boot up procedure.
Exit Discarding Changes
Highlighting this setting and then pressing <Enter> will ignore any changes
you made in the BIOS Setup program and then exit. Your system should
then continue with the boot up procedure.
BIOS SETUP UTILITY
Chipset PCIPnP
7-26
Power Boot Security
Exit system setup with
saving the changes.
Enter
F1
F10
ESC
Exit
Select Screen
Select Item
Go to Sub Screen
General Help
Save and Exit
Exit