Table of Contents
Advertisement
1-3
Server Chassis Features
The following is a general outline of the main features of the F418IL server chassis.
The F418IL chassis is available in a variety of configurations. For more information,
visit our Web site at www.supermicro.com.
System Power
Each F418IL chassis model includes a high-efficiency 94%+ Platinum Level
power supply, rated at 1620 Watts. In the unlikely event your power supply fails,
replacement is simple and can be accomplished without tools.
Note: The power supplies are both redundant, hot-plug.
SATA Subsystem
The F418IL supports up to two (2) 3.5" fixed SATA drives for each node for a total of
sixteen (16) drives. These drives are NOT hot-swappable units and are connected
to a backplane that provides power and control.
Front Control Panel
Each node of the F418IL-R1K62BP chassis includes front I/O with a power button
LED and a UID indicator, with additional LED indicators directly on the serverboard
which provides you with system monitoring and control for one server node.
I/O Ports
The F418IL is an proprietary form factor chassis designed to be used in a 4U
rackmount configuration. The F418IL chassis provides a low-profile add-on card slot,
a VGA port, two USB 3.0 ports, one IPMI Ethernet port and two gigabit Ethernet
ports per node.
Cooling System
The F418IL chassis includes eight (8) 8-cm external cooling fans for the chassis
and its eight serverboard nodes so that when one of the serverboard drawers is
removed, the other serverboards will continue running its fans.
Note: The fans in this system are NOT redundant, but they are hot-plug.
1-5
Chapter 1: Introduction
Advertisement
Table of Contents
