Connector Definitions; Power Supply Connector; Power; Reset - Supermicro SUPERSERVER 6011H User Manual

5-8

Connector Definitions

Power Supply Connector

After you have mounted the
motherboard, added memory, and
PCI cards, you are ready to con-
nect the cables.
ply connector on the P3TDER+
meets the SSI (Superset ATX) 24-
pin specification. Make sure that
the orientation of the PS connector
is correct. Refer to the table on
the right for pin definitions.

Power

The Power Button connection is
located on pins 1 and 2 of JF1.
Refer to the table on the right for
pin definitions.

Reset

The Reset Button connection is lo-
cated on pins 3 and 4 of JF1. This
connector attaches to the hard-
ware reset switch on the com-
puter case. Refer to the table on
the right for pin definitions.
The power sup-
5-13
Chapter 5: Installation
ATX Power Supply 24-pin Connector
Pin Definitions (ATX Power)
Pin Number Definition
Pin Number Definition
13 +3.3V
14 -12V
15 COM
16 PS_ON#
17 COM
18 COM
19 COM
20 Res(NC)
21 +5V
22 +5V
23 +5V
24 COM
Power Button Pin
Definitions (JF1)
Pin
Number Definition
1
2 Ground
Reset Button Pin
Definitions (JF1)
Pin
Number Definition
3
4 Ground
1 +3.3V
2 +3.3V
3 COM
4 +5V
5 COM
6 +5V
7 COM
8 PW R_OK
9 5VSB
10 +12V
11 +12V
12 +3.3V
Power
Reset