Supermicro SUPERSERVER 6011H User Manual page 76

SUPERSERVER 6011H User's Manual
Serial Port 2 Mode
You may use this setting when connecting an infrared device to serial
port 2. The settings are Normal, Sharp-IR, SIR and Consumer.
Parallel Port Address
This option specifies the I/O address used by the parallel port. The settings
for this item include Disabled, 378, 278 and 3BC. Select your setting and
then press "Enter".
Parallel Port IRQ
This option allows the user to set the Parallel Port IRQ. The settings
for this item include 5 and 7.
Parallel Port Mode
This option specifies the parallel port mode. The settings for this item
include Normal, Bi-directional, EPP and ECP.
ECP Mode DMA Channel
This option allows the user to set the setting for the ECP
Mode of the DMA Channel. The settings for this item
include 0, 1 and 3.
7-6