Table of Contents
Advertisement
Power LED
The Power LED connection is lo-
cated on pins 15 and 16 of JF1. It
is used to provide indication that
power is being supplied to the
system. Refer to the table on the
right for pin definitions.
Chassis Intrusion
A Chassis Intrusion header is lo-
cated at JP52 on the motherboard.
Refer to the table on the right for
pin definitions.
Extra Universal Serial Bus
Connection (USB3)
An additional connection for USB3
is located at J214 on the P3TDER+
for front side USB access. You
will need a USB cable (not in-
cluded) to use this connection.
Refer to the table on the right for
pin definitions.
Fan Headers
The motherboard has CPU, chas-
sis and overheat fan headers des-
ignated CPU, CHASSIS and OH
FAN, respectively.
on the right for pin definitions.
See the table
5-15
Chapter 5: Installation
Power LED
Pin Definitions
(JF1)
Pin
Number
Definition
15
5V
16
Control
Chassis Intrusion
Pin Definitions (JP52)
Pin
Number
Definition
1
Signal
2
Ground
USB3 Pin
Definitions (J214)
Pin
Number
Definition
1
+5V
2
Key
3
IRRX
4
Ground
Fan H eader Pin Definitions
(CPU/CHASSIS/OH F ans)
Pin
Number
Definition
1
Ground (black)
2
+12V (red)
3
Tachometer
Caution: These fan headers
are D C power.
Advertisement
Table of Contents
