Mitsubishi MELFA RH-3FH-D Series Special Specifications Manual page 8

■ Introduction
This series offers small-size industrial robots developed using Mitsubishi's latest technology. They are
especially designed to handle and assemble mechanical parts. They are Mitsubishi's answer to the cus-
tomer's need to achieve a compact manufacturing facility capable of highly flexible production, as neces-
sitated by the diffusion of high-density product groups and the shorter product life cycles that have
become common-place in recent years.
However, to comply with the target application, a work system having a well-balanced robot arm, periph-
eral devices or robot and hand section must be structured.
When creating these standard specifications, we have edited them so that the Mitsubishi robot's charac-
teristics and specifications can be easily understood by users considering the implementation of robots.
However, if there are any unclear points, please contact your nearest Mitsubishi branch or dealer.
Mitsubishi hopes that you will consider these standard specifications and use our robots.
Note that in this specification document the specifications related to the robot arm is described
"2 Robot arm", the specifications related to the
and a command list
This document has indicated the specification of the following types robot.
*RH-3FH (CR750-D controller) series
*RH-3FH (CR751-D controller) series
･ About CE Marking in the automization system
The Guidelines of the measures against EMC in the automization system manufactured by the cus-
tomer is shown in
Please refer to it and carry out the measures against EMC of the automization system of the cus-
tomer.
・ No part of this manual may be reproduced by any means or in any form, without prior consent from
Mitsubishi.
・ The contents of this manual are subject to change without notice.
・ The specifications values are based on Mitsubishi standard testing methods.
・ The information contained in this document has been written to be accurate as much as possible.
Please interpret that items not described in this document "cannot be performed." or "alarm
may occur".
Please contact your nearest dealer if you find any doubtful, wrong or skipped point.
・ This specifications is original.
・ Microsoft, Windows, Microsoft Windows NT are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries.
・ The ETHERNET is a registered trademark of the Xerox Corp.
・All other company names and production names in this document are the trademarks or registered
trademarks of their respective owners.
Page 134, "4 Software"
Page 158, "6.4 EMC installation
Copyright(C) 2012-2013 MITSUBISHI ELECTRIC CORPORATION
controllerPage 65, "3
separately.
guideline".
Controller", and software functions
Page 9,