Mitsubishi MELFA RH-3FH-D Series Special Specifications Manual page 124

3 Controller
■ Connections and outside dimensions
The sheath of each signal cable (40 lines) is color indicated and marked with dots. Refer to the cable color speci -
fications in "Table 3-32: Connector pin numbers and cable colors"
(Eg.) Pin number: color indication
１
20A/C
1A/C
Fig.3-34 ： Connections and outside dimensions
External I/O cable
3-113
： Orange ／ Red ／ Ａ
Line color
Pattern of the print mark
type
a type
b type
c type
d type
20B/D
1B/D
when making the connections.
Type of dot mark (see figure below)
Color of dot mark
Color of sheath
One dot
Two dots
Three dots
Four dots
Plug (Fujitsu Ltd) Connector ： FCN-361J040-AU
Cover
or
： FCN-360C040-B