COPIER►BEFORE USING THE MACHINE AS A COPIER
COPYING SEQUENCE
This section explains the basic procedure for copying. Select settings in the order shown below to ensure that the copy
operation takes place smoothly.
For detailed procedures for selecting the settings, see the explanation of each setting in this chapter.
Switch to copy mode.
1
► SELECTING COPY MODE (page 2-4)
2
Select functions.
3
Specify the original scan size, exposure, resolution, etc.
Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
► Specifying the orientation of the original (page 2-29)
If necessary, you can refer to the following functions for the setting.
In Easy mode
Original
8½x11
Paper
Select
8½x11
Tray 1
CA
Preview
• Paper Select
►page 2-12
• 2-Sided Copy
• Copy Ratio
►page 2-22
Staple
•
►page
• Original
►page 2-29
• Exposure
►page 2-19
• N-Up
►page 2-41
• Card Shot
►page 2-43
2-Sided Copy
Copy Ratio
Staple
100%
1 → 1
1
Copies
►page 2-16
2-38,
►page 2-38
Place the original.
Place the original in the document feeder tray of the
automatic document feeder, or on the document glass.
► AUTOMATIC DOCUMENT FEEDER (page 1-75)
► DOCUMENT GLASS (page 1-77)
In Normal mode
Detail
8½x11
Off
Start
• Original
►page 2-29
• Paper Select
• 2-Sided Copy
• Copy Ratio
• Exposure
►page 2-19
• Sort/Group
►page 2-37
• Others
►page 2-52
2-7
8½x11
8½x11
B5
8½x11
8½x11
8½x11
►page 2-12
►page 2-16
►page 2-22