Sending A Fax In Internet Fax Mode - Sharp MX-M950 Software Manual

Image send guide
Hide thumbs Also See for MX-M950:
Table of Contents

Advertisement

SENDING A FAX IN INTERNET FAX MODE

When a default address is configured in "Default Address Setting" in the system settings (administrator), the mode cannot be
changed, the destination cannot be changed, and destinations cannot be added. To switch to Internet fax mode, touch the
[Cancel] key in the touch panel and follow the steps below.
• Place 5-1/2" x 8-1/2" (A5) size originals in portrait (vertical) orientation (
orientation (
manually.
• Image rotation
8-1/2" x 11" and 5-1/2" x 8-1/2"R (A4, B5R, and A5R) originals are rotated 90 degrees and transmitted in
1
8-1/2" x 11"R or 5-1/2" x 8-1/2" (A4R, B5, or A5) orientation. 8-1/2" x 11"R and 5-1/2" x 8-1/2" (A4R, B5, and A5)
originals cannot be rotated for transmission.
• Originals cannot be scanned in succession from both the automatic document feeder and the document glass and
sent in a single transmission.
System Settings (Administrator): Rotation Sending Setting
This is used to select whether or not a scanned original image is rotated before transmission.
The factory default setting is: rotate 8-1/2" x 11" to 8-1/2" x 11"R, and 5-1/2" x 8-1/2"R to 5-1/2" x 8-1/2" (A4 to A4R,
B5R to B5, and A5R to A5).
(4)
15
To
5
10
Condition
Settings
AAA AAA
Address Review
CCC CCC
Address Entry
EEE EEE
Global
GGG GGG
Address Search
III III
2
Frequent Use
Sort Address
• After a one-touch key is touched, if the screen is changed without touching the [To] key, the destination is
automatically specified.
• In addition to specification by a one-touch key, a destination can also be specified by a search number. You can
also manually enter a destination or look up a destination in a global address book. For more information, see
ENTERING
), an incorrect size will be detected. For a 5-1/2" x 8-1/2"R (A5R) size original, enter the original size
(3)
(2)
Cc
BBB BBB
DDD DDD
FFF FFF
HHH HHH
JJJ JJJ
ABCD
EFGHI
JKLMN
OPQRST
Auto Reception
Fax Memory:100%
DESTINATIONS" (page 25).
Place the original.
Place the original face up in the document feeder tray, or face
down on the document glass.
Transmission
Specify the destination.
(1) Touch the [Address Book] key in the base
screen.
1
2
(2) Touch the key of the desired destination.
The
icon appears in one-touch keys in which Internet
fax addresses are stored.
(3) Touch the [To] key.
UVWXYZ
The destination is specified.
(4) Touch the [Condition Settings] key.
48
). If placed in landscape (horizontal)
"2.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mx-m850Mx-m1100

Table of Contents