Disabling The External Interface; Setting Up Password Encryption - Epson WF-C5810 User Manual

Disabling the External Interface

You can restrict the ability to connect from a computer using a USB connection or accessing a
connected USB device or memory card.
Note: Depending on your product features, not all of the options listed below may be available.
1. Access Web Config and select Product Security > External Interface.
2. Select Memory Device and do one of the following:
• Select Disable to prevent access to a USB device or memory card.
• Select Enable to allow access to a USB device or memory card.
3. Select PC Connection via USB and do one of the following:
• Select Disable to prevent a computer from connecting to the product over a USB connection
• Select Enable to allow a computer to connect to the product over a USB connection
4. Click OK to save your setting.
Parent topic:
Related references
Cannot View or Print from a USB Device
Cannot Save Files on a USB Device
Cannot Transfer Files To or From a USB Device
Related topics
Using External USB Devices with Your Product

Setting Up Password Encryption

You can set up password encryption to protect confidential information stored in the product.
1. Log in to the Web Config interface as an administrator.
2. Select the Product Security tab and select Password Encryption.
3. Select Onand select OK.
A message appears about restarting the product. Select OK.
4. Turn the product off and then on again to apply the password encryption setting.
Note: The product may take longer than usual to turn on. This is normal.
Configuring Security Settings
330