Greeting; Figure 2-34 Greeting Interface; Table 2-29 Radius Configuration Parameter - Tadiran Telecom aeonix TGW4 User Manual

User Manual

Table 2-29 RADIUS Configuration Parameter

Name
Primary Server
Key
Secondary Server
Key
Retransmit timer
Retransmit times
CDR type

2.6.8 Greeting

After login, click Advanced>Greeting to open the audio files interface.
Figure 2-34 Greeting Interface
72
Description
Define IP address and port number of preferred Radius server.
Note: if the port number is not yet configured, please use Radius default port number 1813.
Set the share key to be used for encrypted communications between Radius client and server.
Note: The share key should be configured the same for both client and server side.
Set the IP address and port number of standby Radius server. When an error occurs in
communications between gateway and preferred Radius server, the gateway will automatically
activate standby Radius server.
Note: In case of no configuration of port number, use default port number of 1813.
The share key for communications between Radius client and standby Radius server.
Note: The key should be configured the same for both client and server side
Set the overtime on response after transmission of Radius message, the default is 3 seconds.
The retransmission will be performed If no response is given after the timeout.
Set the times of retransmission of Radius message when no response is received. Default is 3
times.
Set whether to send RADIUS charge message for

Outbound calls

Inbound calls

When calls are connected

Unanswered calls

T G W S IP -F X S /F S O G a te w a y S e rie s
Tadiran Telecom