User Manual
Meanings of
Table 1-35
Indicator
Status
Steady green
PWR
Off
(red, green)
Steady red
Blinking green
Steady red
STU
(red, green)
Blinking red
Off
Off
ALM
Blinking red
(red, green)
Steady red
Steady green
(right side)
Off
(right side)
ETH1/ETH2
Steady green
(green)
(left side)
Blinking green
(left side)
Off
(left side)
Steady green
USB
(green)
Off
Table 1-36 TGW96-2G
Glittery letter
Blinking with C
Blinking with D
Blinking with E
Blinking with P
Blinking with T
22
Indicators
TGW96-2G
Description
The power supply is working.
No power supply.
The power supply is abnormal.
The device is running.
The device is starting.
The device is under diagnosis.
The device is locked.
No alarm
The alarms indicated by the blinking alphabetic messages C/E/T on LED
dot-matrix are generated.
The alarms indicated by the blinking alphabetic messages D on LED
dot-matrix are generated.
The transmission rate is 1000 Mbps.
The transmission rate is 10/100 Mbps.
A physical connection is established without any traffic.
A physical connection is established with traffic.
No connection is established.
The USB device is detected.
The USB device is not detected.
System Operation State
Status meaning
IP address conflicts
The severe starting failure needs to address by your dealer
Network failure
Software upgrading
App exited (The device cannot be used normally)
T G W S IP -F X S /F S O G a te w a y S e rie s
Tadiran Telecom
Need help?
Do you have a question about the aeonix TGW4 and is the answer not in the manual?