Tgw96-2G; Table 1-27 Meanings Of Tgw96 Indicators; Table 1-28 Tgw96 System Operation State; Table 1-29 Tgw96-2G Interface Card - Tadiran Telecom aeonix TGW4 User Manual

User Manual

Table 1-27 Meanings of TGW96 Indicators

M a rk F u n c tio n
Power
PWR
Indication
Status
STU
Indication
Alarm
ALM
Indication

Table 1-28 TGW96 System Operation State

G litte ry le tte r
C
D
P
T

1.3.6 TGW96-2G

Designed with a 2U high and 19-inch wide compact chassis, TGW96-2G is suitable for installation in a
standard cabinet.
The interface card of TGW96-2G uses a RJ-45 socket and is connected to the distribution panel in
equipment room using CAT-5 cables supplied with the unit.
The device of TGW96-2G can hold four interface cards to flexibly configure FXS and FXO ports, and
each card equips 24 ports. TGW96-2G can provide up to 96 ports. It supports the following
configurations:

Table 1-29 TGW96-2G Interface Card

Type
24FXS
24FXO
16FXS/8
12FXS/12
18
S ta tu s D e s c rip tio n
Green Power on
Off Power off
Off System locked and inactive
Blinking
Normal operation
green
Green No alarms
Blinking red New alarms occurred but not confirmed
Steady red Power-on is in progress; awaiting normal operation
Red Alarms existed and all alarm information confirmed
S ta tu s m e a n in g
The IP address of gateway conflicts with that of other equipment in LAN. Please settle this problem
before the gateway can be operated normally.
Internal failures have been encountered during gateway start up procedure. Please contact your local
distributor for further diagnosis.
The gateway is in progress of system software upgrade. Please guarantee stable power supply and
do not conduct other operations during this period.
The application software of gateway has been exited. If it cannot be restored by rebooting the
system, please contact your local distributor for further diagnosis.
FXS Ports
24
0
16
12
T G W S IP -F X S /F S O G a te w a y S e rie s
FXO Ports
0
24
8
12
Tadiran Telecom