Figure 2-25 Interface Of System Advanced Configuration; Table 2-23 Nat Configuration Parameters - Tadiran Telecom aeonix TGW4 User Manual

User Manual
Interface of system advanced configuration
Figure 2-25

Table 2-23 NAT Configuration Parameters

Name
Recording
Remote recording
NAT
NAT traversal
Refresh period
62
Description
Call recordings are stored on an external Windows or Linux based recording server, on which
the agent provided by Tadiran Telecom collects and stores the call recording files.
Set this parameter to the IP address of the server.
Note: The recording function needs to be enabled for the subscriber line.
Gateways support several mechanisms for NAT traversal. Usually, static NAT is used when a
fixed public IP address is available. It is necessary to perform port mapping or DMZ function on
router when choosing dynamic or static NAT.
The refresh time must be filled in here when choosing dynamic NAT. Refresh time interval shall
be determined by giving consideration to the NAT refresh time of the LAN router where the
gateway is located. Gateway's NAT holding function will carry out periodic operation according
to this parameter. With seconds as its unit, default value of 60 seconds.
T G W S IP -F X S /F S O G a te w a y S e rie s
Tadiran Telecom