Broadcast-Limit; Bandwidth-Limit - ZyXEL Communications ZyXEL Dimension ES-4124 User Manual

Chapter 48 Interface Commands
An example is shown next.
• Enable ports 1, 3, 4 and 5 for configuration.
• Set the BPDU control to
and five.
sysname(config)# interface port-channel 1,3-5
sysname(config-interface)# bpdu-control tunnel
sysname(config-interface)#

48.2.4 broadcast-limit

Syntax:
broadcast-limit
broadcast-limit <pkt/s>
where
broadcast-
limit
<pkt/s>
An example is shown next.
• Enable port one for configuration.
• Enable broadcast control.
• Set how many broadband packets the interface receives per second.
sysname(config)# interface port-channel 1
sysname(config-interface)# broadcast-limit
sysname(config-interface)# broadcast-limit 21

48.2.5 bandwidth-limit

The
bandwidth-limit
Syntax:
bandwidth-limit
bandwidth-limit pir <Kbps>
bandwidth-limit cir <Kbps>
bandwidth-limit egress <Kbps>
where
pir <Kbps>
cir <Kbps>
egress <Kbps>
An example is shown next.
406
, to forward BPDUs received on ports one, three, four
tunnel
= Enables broadcast storm control limit on the Switch.
= Limits how many broadcast packet the interface receives per second.
command enables bandwidth control on the Switch.
= Sets the maximum bandwidth allowed for incoming traffic.
= Sets the guaranteed bandwidth allowed for incoming traffic.
= Sets the maximum bandwidth allowed for outgoing traffic
(egress) on the Switch.
ES-4124 User's Guide