ZyXEL Communications ZyXEL Dimension ES-4124 User Manual page 350

Chapter 45 Introducing Commands
Table 141 Command Summary: Configuration Mode (continued)
COMMAND
authentication
admin- <pw-string>
password <confirm-string>
arp
inspection
filter-aging-time
350
DESCRIPTION
Enables sending accounting
exec <start-
information for administrative
stop|stop-only>
sessions via SSH, Telnet and
<radius|tacacs+
console port sessions to all
> [broadcast]
configured accounting servers at
the same time.
Enables accounting of system
system
events and specifies the
<radius|tacacs+
protocol method.
>
Enables sending accounting
system
information for system events to
<radius|tacacs+
all configured accounting
> [broadcast]
servers at the same time.
Sets the update period for
update periodic
accounting sessions. This is the
<1-2147483647>
time the Switch waits to send an
update to an accounting server
after a session starts.
Enables authorization for
enable
executing commands on the
<method1>
Switch and specifies which
[<method2>
method should be used first
[<method3>]]
second and third. The methods
can be, "enable", "radius" or
"tacacs+"
Enables authentication for
login <method1>
administrative sessions on the
[<method2>
Switch and specifies which
[<method3>]]
method should be used first
second and third. The methods
can be, "local", "radius" or
"tacacs+"
Changes the administrator
password.
Enables ARP inspection on the
Switch. You still have to enable
ARP inspection on specific
VLAN and specify trusted ports.
Specifies how long (1-
<1-2147483647>
2147483647 seconds) MAC
address filters remain in the
Switch after the Switch identifies
an unauthorized ARP packet.
The Switch automatically
deletes the MAC address filter
afterwards.
Specifies the MAC address filter
none
to be permanent.
PRIVILEGE
13
13
13
13
14
14
14
13
13
13
ES-4124 User's Guide