ZyXEL Communications ZyXEL Dimension ES-4124 User Manual page 168

Chapter 20 Queuing Method
Table 49 Advanced Application > Queuing Method (continued)
LABEL
*
Weight
GE Port
SPQ
Enable
Apply
Cancel
168
DESCRIPTION
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row
first to set the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make
them.
When you select WFQ or WRR enter the queue weight here. Bandwidth is divided across
the different traffic queues according to their weights.
This field is applicable only when you select WFQ or WRR.
Select a queue (Q0 to Q7) to have the Switch use Strictly Priority to service the
subsequent queue(s) after and including the specified queue for the gigabit ports. For
example, if you select Q5, the Switch services traffic on Q5, Q6 and Q7 using Strictly
Priority.
Select None to always use WFQ or WRR for the gigabit ports.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the Save link on the top navigation
panel to save your changes to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
ES-4124 User's Guide