ZyXEL Communications ZyXEL Dimension ES-4124 User Manual page 352

Chapter 45 Introducing Commands
Table 141 Command Summary: Configuration Mode (continued)
COMMAND
classifier <name> <[packet-
format
<802.3untag|802.3t
ag| EtherIIuntag|
EtherIItag>]
[priority <0-7>]
[vlan <vlan-
id>][ethernet-type
<ether-num|ip|ipx|
arp|rarp|
appletalk|decnet|
sna|netbios|dlc>]
[source-mac <src-
mac-addr>]
[source-port
<port-num>]
[destination-mac
<dest-mac-addr>]
[dscp <0-63> ]
[ip-protocol
<protocol-
num|tcp|udp|icmp|e
gp|
ospf|rsvp|igmp|
igp|pim|ipsec>
[establish-only]]
[source-ip <src-
ip-addr> [mask-
bits <mask-bits>]]
[source-socket
<socket-num>]
[destination-ip
<dest-ip-addr>
[mask-bits <mask-
bits>]]
[destination-
socket <socket-
num>] [inactive]>
help
cluster <vlan-id>
member <mac-
address> password
<password-str>
name <cluster
name>
rcommand <mac-
address>
default- <in-band|out-of-
management band>
352
DESCRIPTION
Configures a classifier. A
classifier groups traffic into data
flows according to specific
criteria such as the source
address, destination address,
source port number, destination
port number or incoming port
number.
Displays help information for this
command.
Enables clustering in the
specified VLAN group.
Sets the cluster member.
Sets a descriptive name for the
cluster.
Logs into the CLI of the
specified cluster member.
Specifies through which traffic
flow the Switch is to send
packets.
ES-4124 User's Guide
PRIVILEGE
13
13
13
13
13
13
13