Port Setup - ZyXEL Communications ZyXEL Dimension ES-4124 User Manual

Table 11 Basic Setting > IP Setup (continued)
LABEL
Apply
Cancel
IP Interface
Use these fields to create or edit IP routing domains on the Switch.
IP Address
IP Subnet
Mask
VID
Add
Cancel
Index
IP Address
Subnet Mask
VID
Delete
Cancel

7.7 Port Setup

Use this screen to configure Switch port settings.Click Basic Setting > Port Setup in the
navigation panel to display the configuration screen.
ES-4124 User's Guide
DESCRIPTION
Click Apply to save your changes to the Switch's run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are done
configuring.
Click Cancel to reset the fields to your previous configuration.
Enter the IP address of your Switch in dotted decimal notation for example
192.168.1.1. This is the IP address of the Switch in an IP routing domain.
Enter the IP subnet mask of an IP routing domain in dotted decimal notation. For
example, 255.255.255.0.
Enter the VLAN identification number to which an IP routing domain belongs.
Click Add to save your changes to the Switch's run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are done
configuring.
Click Cancel to reset the fields to your previous configuration.
This field displays the index number of an entry.
This field displays IP address of the Switch in the IP domain.
This field displays the subnet mask of the Switch in the IP domain.
This field displays the VLAN identification number of the IP domain on the Switch.
Click Delete to remove the selected entry from the summary table.
Note: Deleting all IP subnets locks you out from the Switch.
Click Cancel to clear the Delete check boxes.
Chapter 7 Basic Setting
83