Resetting Commands; Re-Enable Commands; Other Examples Of No Commands - ZyXEL Communications ZyXEL Dimension ES-4124 User Manual

Disables port mirroring on the Switch.

47.4.2 Resetting Commands

Use the command to reset Switch settings to their default values.
no
Syntax:
no https timeout
Resets the https session timeout to default.
An example is shown next. The session timeout is reset to 300 seconds.
sysname(config)# no https timeout
Cache timeout 300

47.4.3 Re-enable commands

The no command can also be used to re-enable features which have been disabled.
Syntax:
no ip route <ip> <mask> inactive
where
<ip> <mask> inactive
An example is shown next.
• Enable the IP route with the IP address of 192.168.11.1 and subnet mask of
255.255.255.0. This ip route must have already been created and made inactive prior to re-
enable command being applied.
sysname(config)# no ip route 192.168.11.1 255.255.255.0 inactive

47.4.4 Other Examples of no Commands

In some cases the
feature on a port by port basis.
47.4.4.1 no trunk
Syntax:
no trunk <T1|T2|T3|T4|T5|T6>
no trunk <T1|T2|T3|T4|T5|T6> lacp
no trunk <T1|T2|T3|T4|T5|T6> interface <port-list>
ES-4124 User's Guide
= Re-enables an ip route with the specified IP address and
subnet mask.
command can disable a feature, disable an option of a feature or disable a
no
Chapter 47 Configuration Mode Commands
395