ES-3124 Series User's Guide
where
<peer|tunnel|discard|
network>
An example is shown next.
• Enable ports 1, 3, 4 and 5 for configuration.
• Set the BPDU control to
and five.
sysname(config)# interface port-channel 1,3-5
sysname(config-interface)# bpdu-control tunnel
sysname(config-interface)#
37.2.3 broadcast-limit
Syntax:
broadcast-limit
broadcast-limit <pkt/s>
where
<pkt/s>
An example is shown next.
• Enable port one for configuration.
• Enable broadcast control.
• Set how many broadband packets the interface receives per second.
sysname(config)# interface port-channel 1
sysname(config-interface)# broadcast-limit
sysname(config-interface)# broadcast-limit 21
37.2.4 bandwidth-limit
The
bandwidth-limit
298
=
Type
peer
Type
tunnel
Type
discard
Type
network
forward a tagged BPDU.
, to forward BPDUs received on ports one, three, four
tunnel
=
Enables broadcast storm control limit on the switch.
=
Limits how many broadcast packet the interface receives per second.
command enables bandwidth control on the switch.
to process any BPDUs received on these ports.
to forward BPDUs received on these ports.
to drop any BPDUs received on these ports.
to process a BPDU with no VLAN tag and
Chapter 37 Interface Commands