Ping; Traceroute - ZyXEL Communications ZyXEL Dimension ES-4124 User Manual

Chapter 46 User and Enable Mode Commands

46.3 ping

Syntax:
ping <ip|host-name> < [in-band|out-of-band|vlan <vlan-id> ] [ size
-> <0-1472> ] [ -t ]>
where
<ip|host-name>
[in-band|out-of-
band|vlan <vlan-
id> ]
[ size <0-1472> ]
[ -t ]
This command sends Ping packets to an Ethernet device. The following example sends Ping
requests to and displays the replies from an Ethernet device with an IP address of
192.168.1.100
sysname# ping 192.168.1.100
sent rcvd
1
2
3
sysname#

46.4 traceroute

Syntax:
traceroute <ip|host-name> [in-band|out-of-band|vlan <vlan-id>][ttl
-> <1-255>] [wait <1-60>] [queries <1-10>]
where
<ip|host-name>
[in-band|out-of-
band|vlan <vlan-
id> ]
[ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
388
= The IP address or host name of an Ethernet device.
= Specifies the network interface or the VLAN ID to which the
Ethernet device belongs.
out-of-band
means the other ports on the Switch.
= Specifies the packet size to send.
= Sends Ping packets to the Ethernet device indefinitely. Press
[CTRL]+ C
.
rate rtt avg
1 100 0
2 100 0
3 100 0
= The IP address or host name of an Ethernet device.
= Specifies the network interface or the VLAN ID to which the
Ethernet device belongs.
= Specifies the Time To Live (TTL) period.
= Specifies the time period to wait.
= Specifies how many times the Switch performs the traceroute
function.
refers to the management port while
to terminate the Ping process.
mdev max
0 0 0
0 0 0
0 0 0
in-band
min reply from
0 192.168.1.100
0 192.168.1.100
0 192.168.1.100
ES-4124 User's Guide