Mounting The Switch On A Rack; Figure 7 Mounting The Switch On A Rack - ZyXEL Communications ZyXEL Dimension ES-4124 User Manual
Intelligent layer 3+ switch
Hide thumbs
Also See for ZyXEL Dimension ES-4124:
- User manual (372 pages) ,
- Release note (9 pages) ,
- Specifications (4 pages)
Table of Contents
Advertisement
3 Repeat steps
Switch.
4 You may now mount the Switch on a rack. Proceed to the next section.
2.2.3 Mounting the Switch on a Rack
1 Position a mounting bracket (that is already attached to the Switch) on one side of the
rack, lining up the two screw holes on the bracket with the screw holes on the side of the
rack.
Figure 7 Mounting the Switch on a Rack
2 Using a #2 Philips screwdriver, install the M5 flat head screws through the mounting
bracket holes into the rack.
3 Repeat steps
ES-4124 User's Guide
1
and
2
to install the second mounting bracket on the other side of the
1
and
2
to attach the second mounting bracket on the other side of the rack.
Chapter 2 Hardware Installation and Connection
43
Advertisement
Table of Contents
Troubleshooting
